TH SERIES - AIR / HYDRAULIC BRAKE SYSTEM

AIR / HYDRAULIC TRAILER KITS - NON ABS
The TH series air / hydraulic trailer kits are designed to meet the fluid displacement and pressure requirements of a wide variety of axle capacities. All kits listed below are furnished complete with control valves, air tank, air / hydraulic actuator, air hose and hydraulic brake line kit. The chart below provides an easy way to select the proper kit for a particular application by referencing the axle manufacturer and axle size. Torsion axle kits are also available.

Custom Kits are Available



AXLE
MANUFACTURER
AXLE SET-UP TRAILER KIT SELECTION
AXLE RATING BRAKE TYPE SINGLE AXLE TANDEM AXLE TRIPLE AXLE
DEXTER 5K-7K DRUM TH-801 TH-802 TH-803
8K-12K DRUM TH-1001 TH-1002 TH-1003
15K DRUM TH-1001 TH-1402 TH-1003-2
10K, 15K DISC TH-1501D TH-1502D TH-1503D
HAYES 5K-7K DRUM TH-801 TH-802 TH-803
8K DRUM TH-1201 TH-1202 TH-1203
9K, 10K, 12K DRUM TH-1501 TH-1502 TH-1503
10K, 12K DISC TH-1501D TH-1502D TH-1503D

NOTE: the number of boosters required depends on the brakes, the number of axles and the booster fluid capacity.

WARNING: It is the brake system installers’ responsibility to ensure compatibility between towing vehicle and trailer actuation systems. Various combinations of air/hyd. Or vacuum/hyd. And tow vehicle systems can allow normal maximum working pressure to exceed 1000 psi on drum brakes. Pressures in excess of 1000 psi on drum brakes increase lining wear and can lead to component failure. Make certain your system has the correct boost ratio and brake fluid volume to activate brakes properly.

VACUUM / HYDRAULIC BOOSTER TECHNICAL DATA
KIT SERIES BOOSTER PART NO. OUTPUT PRESSURE
@ 100 PSIG INPUT
FLUID DISPLACEMENT
TH-800 AB-800 750 PSIG 3.45 cu. in.
TH-1000 AB-1000 1000 PSIG 2.65 cu. in.
TH-1200 AB-1200 1250 PSIG 2.65 cu. in.
TH-1400 AB-1400 1000 PSIG 3.45 cu. in.
TH-1500 AB-1500 1500 PSIG 2.65 cu. in.
th series non abs